BOFA indexable face milling cutters are organized for roughing, high-feed, shoulder and chamfering work. Choose the cutter body and insert family from the material, diameter, spindle interface and required surface finish, then send the exact configuration for a technical quotation.
Choose a face milling cutter type
| Type | Typical operation | BOFA starting series |
|---|---|---|
| Precision face milling | Stable face finishing and general shoulder work | 445 Upgraded |
| Rough face milling | Stock removal where edge support and insert life matter | 545 Upgraded |
| High-feed milling | High-feed paths on machines with suitable feed capacity | ASRF12 / ASRF15 |
| Chamfering | Edge breaks and chamfer preparation | SE12 |
Technical fields to confirm
- Workpiece grade and measured hardness.
- Cutter diameter, insert seat and required insert grade.
- Spindle taper, arbor type, gauge length and holder runout.
- Radial engagement, axial depth, coolant and target finish.
Common questions
Which cutter is best for roughing?
Start with a roughing or high-feed body that matches the machine’s power and insert geometry. Send the stock allowance and material so BOFA can confirm the insert grade and cutting window.
Do I need the insert model as well as the cutter body?
Yes. The insert geometry and grade control chip formation, edge strength and material range. Include the body model and insert code in the RFQ.
Can BOFA match a BT40 or BT50 spindle?
Yes. State the taper, arbor standard, gauge length and cutter interface. BOFA can match the face mill arbor and verify the mounting dimensions before quotation.
Need a face milling recommendation? Send the material, diameter and machine interface.